EPOXY FLOORING IN FARGO, ND

Quick answer: Fargo Epoxy is a Fargo, North Dakota epoxy flooring contractor for garage floors, basements, shops and commercial slabs, with systems chosen for salt, snowmelt and freeze-thaw. We serve the whole city, from older north-side neighborhoods to newer south Fargo developments. Call (701) 815-5240 for a free estimate.

Last updated October 2026 · Service-area business (city + phone) · No street address published

Fargo is the largest city in North Dakota and the place where Fargo Epoxy is based. It sits on the west bank of the Red River of the North, directly across from Moorhead, Minnesota, near the crossing of I-29 and I-94. The city is built on the flat bed of ancient Glacial Lake Agassiz, which gives the Red River Valley its famously level land and heavy clay soil. That geography shapes almost every concrete floor in town, and it is the reason we spec our systems the way we do.

Garage floors across Fargo's neighborhoods

Fargo's housing stock varies by neighborhood. North of downtown and around the NDSU campus, many homes date from the early and mid-twentieth century. Garages there are often detached, single-stall or narrow two-car buildings with older slabs that have settled, cracked and been patched. Coating those floors usually starts with careful crack repair and a straight conversation about what the concrete can support. In south Fargo and the newer developments toward Osgood, homes typically have attached two- and three-car garages with relatively recent slabs, big overhead doors and a short drive from the street. These floors tend to be flatter and easier to prepare, and owners are often looking for flake or metallic finishes that match a finished interior.

Our garage floor coatings page covers the options. Most Fargo homeowners choose flake because it hides winter grit. Others choose metallic epoxy for show garages and finished basements.

What Fargo winters do to concrete

Fargo's average January low is near zero degrees Fahrenheit, and cold snaps well below zero are not unusual. The city typically receives roughly fifty inches of snow in a season, and wind across the open valley makes every storm feel worse. Street crews and property owners rely on salt and sand to keep roads and sidewalks passable, and those chemicals ride into garages on tires and boots. When the slush melts, it carries chlorides into the pores of bare concrete. Each time the temperature crosses freezing, trapped water expands and contracts. Over seasons, that produces dusting, pitting and surface scaling.

A sealed floor interrupts that cycle. The coating keeps water and brine on the surface, where a squeegee and a mop can remove it. The cold climate epoxy guide goes through this in detail.

Basements and the flood-fighting reality

Fargo residents know their city's relationship with water. The community has fought spring floods repeatedly, and the clay soil holds moisture. Many homes have sump pumps, and some basement slabs are damp at certain times of year. An epoxy coating is not a waterproofing system, so for basement projects we begin with a moisture discussion. The basement epoxy and moisture guide explains what we look for and how we decide whether a floor is ready.

Commercial and light industrial work in Fargo

Fargo is the commercial hub of the region, with warehouses, distribution space, retail, restaurants, healthcare and manufacturing across the metro. Industrial areas on the north and west sides include shops and service bays whose slabs see oil, solvents and wheeled traffic. We install durable commercial systems and plan phases around business hours. See commercial epoxy flooring for how we approach it.

Choosing a system for Fargo conditions

• Daily-driver garage in a heated attached space: flake epoxy with a clear chemical-resistant topcoat, optionally polyaspartic.
• Detached or unheated garage: timing becomes the key issue; we check slab temperature and discuss a warmer window if needed.
• Entry slabs and covered patios: flake with a UV-stable topcoat.
• Basements: a moisture review first, then flake or metallic depending on the use.
• Shops and business floors: commercial systems matched to traffic and chemicals.

For help comparing finishes, read polyaspartic vs epoxy and flake vs metallic.

Working with a Fargo-based contractor

Because Fargo Epoxy is based in the city, we can usually get to an estimate quickly and answer questions by phone or text. We are a service-area business: there is no public storefront, and we publish only our city and phone number. Estimates are free and happen on site, where we measure, look at cracks and discuss how you use the floor. From there you receive a written scope you can compare against any other bid. If you want to see the whole sequence first, read the installation process.

Neighbors in nearby communities can start with these pages: West Fargo, Moorhead, Horace, Harwood and the full service areas list.

Call or text (701) 815-5240 to schedule a free estimate anywhere in Fargo.

Call (701) 815-5240