Epoxy Flooring FAQ for Fargo, ND
Quick answer: Fargo Epoxy answers common questions about epoxy garage floors in Fargo–Moorhead: cost, winter installs, cure time, road salt, moisture, warranty and service areas. For an answer specific to your floor, call (701) 815-5240.
These are the questions we hear most often from homeowners and businesses in Fargo, West Fargo, Moorhead and surrounding communities. Each answer is short; links go to the detailed guides. If your situation is unusual, call or text (701) 815-5240 and ask. All answers below are general guidance, and anything specific to your floor is confirmed in writing on your estimate.
For a quick tour: start with the cost guide if price is your first question, the cold climate guide if winter is, and the process page if you want to know what install day looks like.
When the FAQ is not enough
Some questions cannot be answered without seeing the floor: whether a patched slab will accept a coating, whether a basement is dry enough, or how to schedule around a cold snap. Those are exactly the questions the free on-site estimate is for. Call or text (701) 815-5240 and describe what you are seeing, and we will give an honest answer. You can also read the service areas page to confirm coverage, the about page to learn how we work, and the contact page to send photos with your request.
Frequently Asked Questions
How much does garage floor epoxy cost in Fargo?
It depends on size, slab condition, repairs and system. We quote after an on-site look. The cost guide lists labeled national ranges for context, not our prices.
Do you offer free estimates?
Yes. Estimates are free, on site, and carry no obligation. Call or text (701) 815-5240.
Can epoxy be installed in winter in Fargo?
Often, if the space can be heated and the slab reaches the product's minimum temperature. Unheated garages are best done in warmer months. See the cold climate guide.
How long does a typical garage install take?
Many residential garages take about one to two days on site, followed by a cure period before vehicles. Larger or more complex floors take longer.
Do I need to empty the entire garage?
Yes. Vehicles and storage must be cleared so edges can be ground and the coat is continuous.
How long before I can drive on the new floor?
It depends on the system and temperature. We give a specific schedule with your estimate.
Will epoxy hold up to hot tires?
A properly prepared, properly built system is designed to resist hot-tire pickup. Poorly prepared floors and thin paints are the ones that fail.
Does road salt hurt an epoxy floor?
A sealed floor resists salt well and rinses clean. The bigger risk is salt soaking into bare concrete.
What is the difference between epoxy and polyaspartic?
Polyaspartic cures faster and resists UV; epoxy is economical and bonds well. Many floors use epoxy base with a polyaspartic topcoat. See polyaspartic vs epoxy.
Is flake or metallic better for a garage?
Flake is the practical choice for most daily-driver garages; metallic is a showpiece. See flake vs metallic.
Can you coat over old paint or a failing epoxy coating?
Only if it is well bonded and can be profiled. Peeling coatings usually need to be ground off.
Can you coat a basement floor?
Often, after a moisture review. Coatings cannot stop water pressure. See basement epoxy and moisture.
Is epoxy slippery when wet?
Smooth gloss can be. Flake blends have natural texture, and extra grip can be added for wet areas.
What does the warranty cover?
Terms are confirmed in writing per contract and typically address workmanship and adhesion when prep was followed on a suitable slab. See prep and warranty.
Do you do commercial floors?
Yes. See commercial epoxy flooring. We schedule around business hours.
Which cities do you serve?
Fargo, West Fargo, Moorhead, Horace, Dilworth, Mapleton, Casselton, Harwood, Kindred, Glyndon and Hawley, plus selected Grand Forks projects. See service areas.
Do you have a shop or street address I can visit?
No. Fargo Epoxy is a service-area business based in Fargo, ND, with no public storefront. We come to you.
How do I clean and care for an epoxy floor?
Sweep, mop with a neutral cleaner, squeegee meltwater in winter, wipe spills quickly, and avoid harsh solvents and dragging metal.
Can epoxy go on a heated garage floor in Fargo?
Often, yes. Radiant-heated slabs need the heat turned down before and during installation and brought back up gradually afterwards, following the product's instructions. We check the system at the estimate.
Will a coated garage floor be slippery with snow and slush?
Any smooth floor can be slick when wet. Flake systems add texture, and we can add an anti-slip additive to the topcoat for garages where snow melts off vehicles.
Should I coat my garage before or after winter?
Late spring through early fall is easiest because the slab and air are warm. Winter installs are possible in heated garages or with the right products; we confirm slab temperature on site.